# 1
Channel Style Adjustable Ballmount - 2" & 2-5/16" Balls - 14,000 lbs
Still haven't towed anything with it yet but it seems very solid. I do think it will rattle some in the receiver because it is loose in my 2" receiver on my 2019 F150.
This hitch has worked out great for me over the last year. It’s very heavy duty and easy to adjust. I’ve hauled a 9,000 lb boat, long-distance on numerous occasions without issue. I also haul a landscape trailer on a daily basis weighing over 5,000lbs and haven’t had a single issue. Great hitch that was significantly cheaper than others and is very high quality. I’ve recommended it to several people and I wouldn’t hesitate to buy again. The only thing I would like to have now in a hitch is a tongue weight gauge, but it isn’t necessary.
# 2
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Sara R was helpful helping me find the right hitch for what I described as needing. I was excited to see the hitch pin in my order details even though I didn't order it. Sadly, the picture gave me a false impression. Overall, excellent customer service and product.
Working in the sand and grass of my driveway my wife and I installed our new etrailer receiver hitch. Great fit and finish! Went right on as described in the online guide. Hitch required a spacer washer on top back bolt attachment point. Taped it on so it would not move while lifting in place and it stayed right there! Used a car jack to raise up and hold the hitch into the underside of the trunk tighten the bolts and reattached the tail pipe done. Now we can pull our Sunfish Sailboat any where the car will go.
# 3
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Excellent quality, fast shipping. Finding a metric ball for our international application was a bit difficult. We knew etrailer was the place to go for all things "trailer" related. Very happy with the purchase!
Strong and seems to be well made and well finished. One-inch ball mounting hole. I used this for a Curt hitch mounted on a 2014 Forester and pulls a small Harbor Freight trailer. Perfect height and trailer is level. Warning - don't get their hitch pin, it does not have a hole for a cotter pin, only a weak clip that I would not trust.
# 4
Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches
Picked up my teardrop in ABQ on 2/17/23, and the Curt ball mount lined up perfectly with no drop/rise, and the extra length gave clearance for my rear door mounted spare tire. This mount is a beast, and the "overbuilt" nature of it gave me confidence that my Bronco would tow the teardrop easily. I also got the Curt Echo wireless brake controller, which synced easily to my phone and was easy to install, set up, and use. Overall a great towing experience, thanks to etrailer and Curt!
Very versatile - can use it on both my vehicles that have very different hitch height. Clean welds, super solid. Weighs a LOT!
# 5
Draw-Tite Ball Mount for 2" Hitches - 3" Rise, 4" Drop - 9-1/4" Long - 16K
Perfectly as described, Box was a heavy hitch and the box must have been damaged in shipping so it was a little delayed. You can't mess up a forged hitch it still is in excellent condition.
This simple ball mount will get the job done. It's a solid casting so it weighs a lot.
# 6
B&W Tow & Stow 3-Ball Mount - 2" Hitch - 7" Drop, 7-1/2" Rise - 10K - Black
Bought to pull my boat with my Yukon and needed a drop hitch to level out the trailer. I wanted to buy a quality hitch, and let me tell you the B&W does not disappoint. Well engineered. It’s it heavy but when installed it is pretty easy to adjust height and ball size. Also supporting an American company is a plus!
Great hitch. I bought the 3 ball with 8" drop hitch. My utility trailer needs it almost all the way down. My boat trailer needs it almost all the way up on my Chevy 2500HD. The only time I have removed it was to install a Pintle hitch one day to haul a trailer for a tractor. Tip: Use silicone spray on the adjustable pins. Use of lithium grease fouls them up so it's difficult to remove and reinstall them (collects dirt, dust). Also lubricate your hitch lock monthly, or you won't be able to open it if you ever want to remove the hitch.
# 7
Draw-Tite Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 8-1/2" Long - 16K
This is a beast of a drawbar, solid forged steel & well finished. It's also very heavy and E-Trailer needed to ship 3 times because the first two broke out of the box they were packed in. (Someone in the USPS has a couple nice draw bars.) Fortunately the 3rd effort was much better packed in a reinforced box and was successfully delivered. E-Trailer customer service was exemplary in resolving the shipment issue & I will definitely shop with them again.
I had a great experience ordering from you. Your organization kept me completely up to date with the order & shipping process and delivered the exact products I ordered. Attached is a photo of the 16,000 lbs capacity hitch and 30,000 lbs 2 5/16 ball you sold me in use. The boat and trailer total about 12,000 pounds. Thanks again.
# 8
B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black
I wish I would have bought one of these years ago. It would have saved me from buying 4 different height hitch receivers. I have a boat trailer that requires me to mount this hitch upside down to get about 2.5in of rise. On the flip side is my utility trailer that requires a 2 inch drop. The kicker is that when I load the truck down with gear and people or load the utility trailer up really heavy, this hitch allows me to kick the ball up or down a notch to keep the trailer level. Also if you ever rent heavy equipment most of the trailers they use will have 2 5/16 ball, so I just flip the ball and I'm in business. Build quality and finish is excellent. I don't keep the mount on all year long but with some judicious use of grease this thing hasn't shown any rust over the past year of use. I am currently using this on a stock GMC Sierra 1500 and I really could have gone with one size down on the hitch drop/rise, but I figured if I ever bought a 3/4 ton truck or a friend with one ever needed to borrow the hitch it would have enough drop to work with that application as well. As it stands the 5in drop isn't too long to cause clearance issues with a half ton GM truck. For those of you who are wondering about thieves making off with the ball mount - the design of the tow and stow is such that with all the pins removed and the hitch installed on the vehicle, it is not possible to rotate the ball mount off the receiver. Especially if you mount the receiver using the inner most mounting hole. All that is needed is a locking hitch pin and the whole setup is secure. I've attached a picture of the hitch installed on a 2015 GMC Sierra 1500 4x4 for reference.
I am so absolutely thrilled with my trailer hitch! etrailer made my purchase extremely easy. I have never bought a trailer hitch before, but I was able to pick the right size and the capability that I needed, based upon awesome product videos and reviews. Your company has exceeded my expectations of customer service and prompt product delivery. I applaud you and your team!
# 9
Convert-A-Ball Ball Mount for 2" Hitches - 8-3/4" Rise - 10" Drop - 8,000 lbs
Works great. Needed the drop to tow a utility trailer at level.
As always etrailer has the best products, best information and customer service, plus fast shipping! Thank you again!
# 10
Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop - 7,000 lbs
Not that many non-adjustable option for a 12” drop and this one is the best! Love the cushion and it’s very strong. I put that to the test today when I got rear ended with it in the back of my truck. This thing saved the back of my Ram. Came right back to etrailer and ordered a new one!
Needed a large drop hitch to pull my car trailer. This item came quickly and worked perfectly.
# 11
Curt Adjustable 2-Ball Mount - 2-1/2" Hitch - 6" Drop, 5-1/4" Rise - 20K
The product was well described on the web site. The truck matching worked great and was easy to use. This hitch was very easy to order and the price was good. The delivery date was correct, it was easy to follow with the information provided. The hitch was as advertised, easy to install and easy to use. Great Job!
First of all, ETRAILER is a great company in my opinion. Their selection, prices and customer service are all great. This hitch is stout! I'm the type that I'd rather have more capability than what I may actually use. For what I will use this for, I'm 100% sure it will be way more than I'll ever need but I'm also confident that I would not have any issues using it regularly at it's maximum capability. The construction of it is top notch and I'd be willing to bet it can do more than what it's rated for. I will definitely be ordering the 20K Pintle that works with this as well as a Curt 5th Wheel and Gooseneck. Thank you ETRAILER and thank you CURT for amazing service and and amazing product.
# 12
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
I have two of these. My first I bought two years ago. I very highly recommend this Curt Class III Ballmount 2" Drop because of its price, durability and quality. I towed various class 3 loads with ease and confidence with this ballmount. It slides into the hitch and does its job without fail. It looks excellent after towing a load. etrailer's price is about as good as it gets and delivery is very speedy.
Easy install, took around 30 minutes by my self to install. Hardest part of install was torquing the bolts ! Installed 13322 Class III Hitch - Gm 1500/2500 Pickup and Curt Class III Ballmount -2ball-2 Drop
# 13
Flash Secure Adjustable 2-Ball Mount w Chrome Balls - 2" Hitch - 6" Drop, 7" Rise
Very strong, easy to install and very secure. Yes a bit pricey, but well worth the money. I did notice there was what I thought was an unusual amount of play in the receiver. I called etrailer and Marcia was so very helpful and very concerned that I may have received the wrong product. She even called the manufacturer and found out what the changes that were made by the manufacturer which made the pictures incorrect. My hat is off to Marcia and all the folks at etrailer
Good workmanship. It will be perfect for my trailering. All that I expected save one detail... The hitch has two locks - one for the receiver and one for the adjustable ball assembly. It would be nice if the locks were keyed the same. I always worry about losing my hitch keys. Now I have another key to worry about.
# 14
Draw-Tite Ball Mount for 2" Hitches - 5" Rise, 6" Drop - 10-1/4" Long - 16K
Its been a year and I aint broke it yet. I use this hitch to tow my 7Klb trailer. The trailer is tongue heavy and I needed something rugged to tow it with. Haven't had any troubles with this hitch.
This ball mount fit the SUV just right. I needed a 5 inch rise and the mount angled away from the bumper. However, the load capacity was way more than I needed, but the fit made up for that. It's a little loose in the receiver so I will be adding a stabalizer to lock it in place.
# 15
Rapid Hitch Adjustable, Aluminum Ball Mount Kit w/ 2 Zinc Balls - 5-1/2" Drop
I pay to receive the product in good condition, my hitch ended up being damaged, I don't know what type of packaging this was, they are supposedly a waoooo site, I ask for my return label and my refund, I
Works flawlessly. I was very excited the day I got home and my Rapid hitch was on the front porch. It came in nice box and was packaged very well. I opened it up and unpacked my rapid hitch and I was very impressed with the quality and precision of this hitch. All of the machining was PERFECT and everything fit together right. I put it in my truck right away. Going down the road with the trailer on and off there is absolutely no rattles, clunks, or jolts. I also love how everything is aluminum or stainless steel, NO RUST. I wish I could've gotten the greaseless model but my boat is too heavy. My only complaint is that it doesn't come with locking pins. With a hitch this expensive I really wish it came with them. Do yourself a favor and order them with your rapid hitch so you don't have to pay for shipping in the future. Other than that great product and I believe it will outlast me.
# 16
EZ Heavy Duty Adjustable Hitch with Combo Ball - 8" Drop/Rise - 14,000 lbs
Just did ~500miles with about 5k worth of car plus trailer over hill and dale. Works great. No detectable wobbling, but pins are easy to get through holes (not too tight or misaligned). Heavy, but not like, completely unwieldy.
This Hitch does the job perfectly for all my trailers keeping in the upright position and did not notice any excessive rattle..
# 17
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
I purchased the etrailer.com 2-3/4 " Rise or 4" Drop Ball Mount Kit, Curt Trailer Hitch Receiver and Twist-in 7-Pole RV-Style Trailer Connector for my 2011 Chevy Silverado. Quick Delivery! All the necessary parts arrived in perfect condition. Directions were spot on and the instructional videos were great.
The drop ball mount is the perfect size for my Jeep. The versatile hitch balls are convenient. Thank you for putting together a great kit, providing excellent communication, and delivering it quickly.
# 18
Curt Heavy Duty Forged Ball Mount for 2" Hitches - 5" Rise - 6" Drop - 17,000 lbs
Very heavy duty and perfect.
This is one solid hitch. Bought the hitch to pull about 5000 lbs. there's no doubt in my mind that it can handle it.
# 19
Convert-A-Ball Ball Mount for 2" Hitches - 6-3/4" Rise, 8" Drop - 10,000 lbs
I use this hitch when I pull my horse trailer to make the stop/start transitions as smooth as possible for the horses in the back. It works great. I also love that its a category IV hitch. Really heavy duty. My truck sits pretty high, and the amount of drop - 8" is perfect. I never worry about hitch failure travelling with my horses - they're a heavy load, and any failure would be a disaster. E Trailer provided excellent service, and their shipping to Canada was prompt and hassle free. Way to go guys, keep up the great work!
I have a 2012 GMC Sierra HD with a 12" suspension lift. I recently purchased a ball mount hitch with 8" inch drop for our 36' RV trailer and it worked great. It took 3 days for the hitch to get to me. Great service from e-trailer.
# 20
Curt Heavy Duty Forged Ball Mount for 2" Hitches - 3" Rise - 4" Drop - 17,000 lbs
I just opened up my new Class 5 Curt XD hitch and have not yet installed it so my comments are based on first impressions only. It is very heavy duty - and heavy at 40 lbs. - made of extremely thick metal and outfitted with quality Grade 8 bolts with square necks so they won’t turn when torquing on the nuts to attach the main tube to the side mounting plates. My bolts are plated yellow (which I like) rather than silver as you may have seen in some online photographs. It is substantially beefier than my existing Grade 4 hitch and superior in every way. It’s an impressive piece of hardware. I cannot imagine anyone being disappointed with it on specifications, quality, strength, and general appearance. It’s a beast. What I AM disappointed in is Curt’s packaging and the condition in which the hitch arrived. (This is NOT a reflection on etrailer.com as the hitch arrived in Curt’s original packaging.) The unassembled main tube and the two side mounting plates come bundled together with nothing separating them but shrink wrap. No cardboard, plastic, even paper coming between the metal surfaces - just shrinkwrap probably not even a couple of mils thick. With basically metal-to-metal contact in an oversized-box with the bundle jostling around, it would be a miracle if there were no scratches, gouges, or some type of damage to at least one piece, which is exactly what happened to my hitch. The main hitch tube, on the exterior facing plane, on the driver side where I’ll see it every day, has some gouges on it that go through the powder-coating to bare metal. I can - and will - paint them to prevent rust (and, therefore, have to paint the whole hitch to match). But the gouges will still be noticeable as they go through the thicker, pebbly, powder-coat finish and will undoubtedly still appear as depressions in the surface even once painted. I fully realize this kind of surface damage will almost certainly happen with regular usage of the hitch anyway and that it’s certifiable to demand absolute perfection in anything. But if you are someone who cares about the aesthetics of your equipment and keeping it looking new for as long as possible, it is very disappointing to receive such an expensive and prominent piece of hardware damaged right out of the box and requiring immediate repainting. The plastic parts bag had also ripped open in transit, with nuts, bolts, shims, etc. rattling around in the box. I am dumbfounded that Curt packages such a high-quality piece of equipment so shoddily where such damage is virtually unavoidable. I bought from Curt solely due to their being an American manufacturer and to support American workers so this is doubly discouraging. It’s a trivial complaint in the big scheme of things and not worth demanding a replacement over. Just be aware that unless Curt changes their packaging practices it is very possible you will have the wind taken out of your towing project sails just as I have. Again, this in no way reflects on etrailer. My experience to date with etrailer (website, educational resources, staff reviews, ordering, tracking, email contact, etc.) has been beyond exemplary in every way. They rank as a Top Five online retailer in my opinion, maybe even the best.
First of all, the products you find at etrailer are not your garden variety, home depot kind of fair. Much higher quality and grade/weight ratings. So to be able to get hard to find items and then by orderring at least 100$ worth of stuff also get it delivered free in 4 days, is awesome. The prices are incredible too.
Andersen Rapid Hitch Ball Mount Review - 2013 Dodge Ram
Today on our 2013 Dodge Ram 1500 well be test fitting the Anderson Rapid Hitch Adjustable Aluminum Ball Mount with two chrome balls with a 6 inch rise or a 5 inch drop, part number am3410. Now before we begin our test fit we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 20 inches. Now this measurement may vary due to tire size, hitch style or any other after-market accessories. Now to begin our test fit well slide the shank of the ball mount in the drop position into the opening on the hitch, line up our pin holes and secure the ball mount with the pin and clip.
Curt Multi-Ball Adjustable Ball Mount Review - 2013 Dodge Ram
Today on our 2013 Dodge Ram 1500 well be test fitting the Curt Multi-ball Adjustable Ball Mount for 2 inch hitches; Part #D900. Now before we begin our test fit we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 20 inches. Now this measurement may vary due to tire size, hitch style, or any other aftermarket accessories. To begin our test fit, in the drop position, we will slide the shank of the ball mount into the opening of the hitch, line up our pin holes, insert our pin through our pin holes, and secure the clip on the other side securing the ball mount to the vehicle.
Curt Tri-Ball Mount Review - 2013 Dodge Ram
Today on our 2013 Dodge Ram 1500, we'll be test fitting the Curt Tri-Ball Mount for 2" hitches, part number C45001. Now before we begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 20". Now this measurement may vary due to the tire size, hitch style, or any other after-market accessories. To begin our test fit, we'll simply slide the shank of the ball mount into the opening of the hitch, line up our pin holes, and secure the ball mount to the vehicle with the pin and clip.
Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2013 Dodge Ram
Today on our 2013 Dodge Ram 1500, we'll be test fitting the Convert-A-Ball cushioned ball mount for 2" hitches with a 6-3/4" rise, or 8" drop, rated at 10,000 lbs., part number AMSC8. Now before we begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 20". Now this measurement may vary due to the tire size, hitch style, or any other after-market accessories. To begin our test fit, in the drop position, we'll slide the shank of the ball mount into the opening of the hitch, line up our pin holes, and secure the ball mount to the vehicle with the pin and clip.
MaxxTow Tow Strap Loop Review - 2013 Dodge Ram
Today on our 2013 Dodge Ram 1500, well be test fitting the MaxxTow Tow Strap Loop for Two Inch Trailer Hitches rated at 10,000 pounds, part number MT70029. Now before I begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 20 inches. Now this measurement may vary due to tire size, hitch style or any other aftermarket accessories. To begin our test fit, well simply insert the tow strap loop into the receiver end of the hitch, lineup our pinholes and secure it with the pin and clip. The pin and clip is sold separately. This MaxxTow Tow Strap Loop is a heavy-duty hitch mounted shackle, which acts as an attachment point for straps, cables or rope.
MaxxTow Tow Hook Review - 2013 Dodge Ram
Today on our 2013 Dodge Ram 1500, well be test fitting the MaxxTow Tow Hook for Two Inch Hitches rated at 10,000 pounds, part number MT70028. Now before I begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 20 inches. Now this measurement may vary due to tire size, hitch style or any other aftermarket accessories. To begin our test fit, well simply slide the shank of the two hook into the opening of the hitch, lineup our pinholes and secure the tow hook to the vehicle with the pin and clip.
Draw-Tite Ball Mount Review - 2013 Dodge Ram
Today on our 2013 Dodge Ram 1500 well be test fitting the Draw-Tite ball mount with a 3/4 inch rise or 2-inch drop rated at 6,000 pounds, part number 2923. Now before we begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 20 inches. Now this measurement may vary due to tire size, hitch style or any other aftermarket accessories. Now to begin our test fit in the drop position, well slide the shank of the ball mount into the opening of the hitch, line up our pin holes, insert our pin through our pin holes, and secure with the clip on the other side.
Diversi-Tech Adjustable Ball Mount Review - 2013 Dodge Ram
Today on our 2013 Dodge Ram 1500 well be test fitting the Deversi-Tech self-locking adjustable aluminum ball mount with two chrome balls with a six-inch drop or seven-inch rise rated at 10,000 pounds, part number dtalbm6600. Now before we begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 20 inches. Now this measurement may vary due to tire size, hitch style or any other aftermarket accessories. To begin our test fit in the drop position, well slide the shank of the ball mount into the opening of the hitch, line up our pin holes, and turn the key to bring out the self-locking pins.
Convert-A-Ball Cushioned Weight Distribution Shank Review - 2013 Dodge Ram
Today on our 2013 Dodge Ram 1500 well be test fitting the Convert-a-Ball cushioned weight distribution shank for two-inch hitches rated at 10,000 pounds, part number amac1. Now before we begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 20 inches. Now this measurement may vary due to tire size, hitch style or any other aftermarket accessories. To begin our test fit in the drop position, well simply slide the shank into the opening of the hitch, line up our pin holes, and secure the weight distribution shank with the pin and clip.
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2013 Dodge Ram
Today on our 2013 Dodge Ram 1500, well be test fitting the Convert-A-Ball Cushion Ball mount for two inch hitches with a 3 inch rise or two inch drop rated at 10,000 pounds, part number AMSC2. Now before I begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 20 inches. This measurement may vary due to tire size, hitch style or any other aftermarket accessories. To begin our test fit in the draw position, well slide the shank of the ball mount into the opening of the hitch, lineup our pinholes, insert out pin though our pinholes and secure it with the clip on the other side.
Andersen Rapid Hitch Ball Mount Review - 2011 Dodge Ram Pickup
Today on our 2011 Dodge Ram Pickup, well be test fitting the Rapid Hitch Adjustable Aluminum Ball Mount Kit with two chrome balls, part number AM3410. Well begin our test fit by getting our hitch height. This is the measurement from the ground to the inside top edge of our receiver tube. We have a hitch height of 19 inches. Please keep in mind that this measurement may vary depending on tire size, model type and aftermarket parts. Now well install our ball mount in the dropped position.
Draw-Tite Ball Mount Review - 2011 Dodge Ram Pickup
Today on our 2011 Dodge Ram Pickup, well be test fitting the Draw-Tite Ball Mount with a 3/4 rise or a 2 inch drop rated at 7,500 pounds, part number 2923. Well begin our test fit by getting our hitch height. This is the measurement from the ground to the inside top edge of our receiver tube. We have a hitch height of 19 inches. Please keep in mind that this measurement may vary depending on tires size, model type and aftermarket parts. Well go ahead and install the ball mount in the dropped position.
Curt Tri-Ball Mount Review - 2011 Dodge Ram Pickup
Today on our 2011 Dodge Ram Pickup, well be test fitting the Curt Tri Ball Mount, part number C45001. Well begin our test fit by getting our hitch height. This is the measurement from the ground to the inside top edge of our receiver tube. We have a hitch height of 19 inches. Please keep in mind that this measurement may vary depending on tire size, model type and aftermarket parts. Well go ahead and install our tri ball mount into the receiver tube of our hitch, well lineup the pinhole and install our pin and clip.
Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2011 Dodge Ram Pickup
Today on our 2011 Dodge Ram Pickup we'll be test fitting the Convert-A-Ball Cushion Ball Mount for Two Inch Hitches with a 6-3/4 Inch Rise or an 8 Inch Drop Rated at 10,000 pounds, part number amsc8. We'll begin our test fit by getting our hitch height. This is the measurement from the ground to the inside top edge of our receiver tube. We have a hitch height of 19-1/2 inches. Please keep in mind that this measurement may vary depending on tire size, model type and after-market parts. We'll now install the cushion ball mount in the drop position.
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2011 Dodge Ram Pickup
Today on our 2011 Dodge Ram Pickup we'll be test fitting the Convert-A-Ball Cushion Ball Mount for Two Inch Hitches with a 3/4 Inch Rise or a Two Inch Drop rated at 10,000 pounds, part number amsc2. We'll begin our test fit by getting our hitch height. This is the measurement from the ground to the inside top edge of our receiver tube. We have a hitch height of 19-1/2 inches. Please keep in mind that this measurement may vary depending on tire size, model type and after- market parts. We'll insert our shank into the receiver tube of the hitch.
MaxxTow Tow Strap Loop Review - 2009 Dodge Ram Pickup
Today, on our 2009 Dodge Ram 1500, we'll be test-fitting the MaxxTow Tow Strap Loop, for 2-inch hitches, rated at 10,000 pounds, part number MT70029. This hitch-mounted heavy-duty shackle can be used as an attachment point for strap, cable or rope. We'll begin our test-fit by sliding the shank of it into the receiver tube of our hitch. We can then secure it with a pin and clip, which is sold separately. And that completes today's test-fit for the MaxxTow Tow Strap Loop, for 2-inch trailer hitches, rated at 10,000 pounds, part number MT70029, on our 2009 Dodge Ram 1500. .
Curt Tri-Ball Mount Review - 2009 Dodge Ram Pickup
Today on our Dodge Ram 2009 1500, we'll be test fitting the Curt tri-ball mount for 2 inchhitches, part number C45001. We'll begin our test fit by first obtaining the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. Now the hitch height for this vehicle is 20 inches. Keep in mind that this measurement may vary, due to tire size, hitch style, or aftermarketaccessories. We'll begin our test fit by sliding the shank of the ball mount into our opening of our receiver tube. We'll then secure it with a pin and clip.
Curt Multi-Ball Adjustable Ball Mount Review - 2009 Dodge Ram Pickup
Today on our 2009 Dodge Ram 1500 we'll be test fitting a Curt Multiball Adjustable Ball Mount for two inch hitches, part number d900. We'll begin our test fit by first obtaining the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. Now the hitch height for this vehicle is 20 inches. Keep in mind that this measurement may vary due to tire size, hitch style or after market accessories. In the draw position, we'll begin out test fit by sliding the shank of the ball mount into the receiver tube of our hitch, we'll then secure it with a pin and clip. As you can see we can pull the pin at the base of the ball mount in order to access the three different size balls.
Andersen Rapid Hitch Ball Mount Review - 2009 Dodge Ram Pickup
Today on our 2009 Dodge Ram 1500, we'll be test fitting the Rapid Hitch Adjustable Aluminum Ball Mount with a 5 1/2 inch drop with two different size chrome balls part number AM3410. We'll begin our test fit by first obtaining the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. Now the hitch height for this vehicle is 20 inches. Keep in mind that this measurement may vary due to tire size, hitch style or having market accessories. We'll begin our test fit by sliding the shank of the mall mount in the drop position and securing it with the pin and clip.
MaxxTow Ball Mount Review - 2009 Dodge Ram Pickup
Today, on our 2009 Dodge Ram 1500, we'll be test-fitting the MaxxTow Ball Mount, with 2-inch accessory receiver, for 2-inch hitches, with a two and a quarter inch drop, rated at 5,000 pounds, part number MT70066. We'll begin our test-fit by first obtaining the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. Now, the hitch height for this vehicle is twenty inches. Keep in mind that this measurement may vary due to tire size, hitch style, or after-market accessories. With the accessory receiver in the upright position, we'll begin our test-fit by sliding it into the receiver tube of our hitch.
Draw-Tite Ball Mount Review - 2009 Dodge Ram Pickup
Today on our 2009 Dodge Ram pickup well be test fitting the Draw Tite ball mount with a rise or 2 drop rated at 7500 pounds, part number 2923. Well begin our test fit by first obtaining the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. Now the hitch height for his vehicle is 20. Keep in mind that this measurement may vary due to tire size, hitch style or aftermarket accessories. Well now slide the shank of the ball mount in the drop position into the receiver tube of our hitch. Well then secure it with a pin and clip.
Diversi-Tech Adjustable Ball Mount Review - 2009 Dodge Ram Pickup
Today on our 2009 Dodge Ram 1500 we'll be test fitting the Diversi Tech Self Locking adjustable aluminum ball mount with a six in drop or seven inch rise rated at 10,000 pounds, part number dtalbm6600. We'll begin our test fit by first obtaining the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. Now, the hitch height for this vehicle is 20 inches. Keep in mind that this measurement may vary due to tire size, hitch style or after market accessories. We'll begin our test fit in the drop position by sliding the shank of the ball mount into the receiver tube of our hitch. We'll then turn the key to allow the integrated hitch pin to slide into the hitch pin holes.
Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2009 Dodge Ram Pickup
Today, on our 2009 Dodge Ram 1500, we'll be test-fitting the Convert-A-Ball Cushion Ball Mount for 2-inch hitches, part number AMSC8. We'll begin our test-fit by first obtaining the hitch height of our vehicle, the hitch height is the measurement from the ground to the inside top of the receiver tube. Now, the hitch height for this vehicle is 20 inches. Keep in mind that this measurement may vary due to tire size, hitch style or after-market accessories. We'll begin our test-fit in the drop position by sliding the shank of the ball mount into the receiver tube of our hitch, we'll then secure it with the pin and clip. We'll now measure from the ground to the top of the ball platform and we'll get a measurement of about 12 inches. If your vehicle's hitch height matches the hitch height of our vehicle and trailer's ride height matches this measurement, this will be an appropriate ball mount for you.
Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2009 Dodge Ram Pickup
Today on our 2009 Dodge Ram 1500 we'll be test fitting the Covert-a-Ball Cushion Ball Mount for 2-inch hitches with a 1-inch rise or 2-inch drop rated at 14,000 pounds, part number AMSC2HD. We'll begin our test fit by first obtaining the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. Now the hitch height for this vehicle is 20 inches. Keep in mind that this measurement may vary due to tire size, hitch style or after market accessories. We'll begin our test fit in the drop position by sliding the shank of the ball mount into the receiver tube of our hitch. We'll then secure it with the pin and clip. We'll now measure from the ground to the top of the ball platform, and we'll get get a measurement of about 17-3/4 inches.
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2009 Dodge Ram Pickup
Today on our 2009 Dodge Ram 1500 we'll be test fitting the Convert-A-Ball Cushion Ball Mount for 2" hitches with a 3/4" rise or 2" drop, rated at 10,000 pounds, part number AMSC2. We'll begin our test fit by first obtaining the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is 20". Keep in mind that this measurement may vary due to tire size, hitch style or after market accessories. We'll now begin our test fit by sliding the ball mount shank into the opening of our hitch in the drop position. We'll then secure it with a pin and clip. We'll then measure from the ground to the top of the ball platform and we'll get a measurement of about 18".
What our customers are saying:
"I received this order yesterday. Thanks for the outstanding service. I appreciate it! Thanks, Alex"